Name: 27th International Conference of the International Nuclear Target Development Society (INTDS2014)
Start: 2014-08-31T10:00:00+09:00
End: 2014-09-05T13:00:00+09:00
Location: Miraikan

Monday, 1 September 2014

09:30

09:30 - 10:00
Room: CR2,7F
10:00
10:00 - 11:00
Room: CR2,7F
Contributions

10:00 Present status and future project of charge strippers at RI beam factory - Hiroki OKUNO (RIKEN, Nishina Center)

10:20 Present status of the high-power production target system for BigRIPS separator - Koichi Yoshida (RIKEN Nishina Center)

10:40 Development of RI production target for ERIS at RIKEN RI Beam factory - Tetsuya Ohnishi (RIKEN)
11:00 Coffee break
Coffee break
11:00 - 11:20
Room: Lobby, 7F
11:20
11:20 - 12:40
Room: CR2,7F
Contributions

11:20 Deposition of Metals and Metal Oxides on Plastic Foils - Bettina Lommel (GSI)

11:40 THE STATUS OF THE TARGET PREPARATION LABORATORY AT IFIN-HH BUCHAREST, ROMANIA - Nicoleta-Mihaela Florea (Horia Hulubei National Institute of Physics and Nuclear Engineering - IFIN HH)

12:00 characterizatio of natural and enriched oxygen targets in lithium carbonate foils - Ntombizonke Kheswa (iThemba LABS)

12:20 CHANDA European program: toward a network of laboratories for preparation and characterization of targets - Charles-Olivier Bacri (CNRS/IN2P3/IPNO)
12:40 Lunch
Lunch
12:40 - 13:40
13:40
13:40 - 15:10
Room: CR2,7F
Contributions

13:40 Design and Automation of a new versatile UHV-Multilayer evaporation plant for very high vacuum requirements - Dominik Seiler (TUM)

14:10 Preparation and sublimation of uranium tetrafluoride for the production of thin 235UF4 targets - Goedele Sibbens (JRC-IRMM)

14:30 Fabrication of Calcium-Gold and Calcium-Lead Targets for Ion Beam Experiments at TRIUMF ISAC-II - Vinder Jaggi (Micromatter (Triumf))

14:50 Fabrication of Natural and Isotopic Carbon foils by Thermal Cracking Method and its some Issues - Isao Sugai (KEK)
15:10 Coffee break
Coffee break
15:10 - 15:30
Room: Lobby, 7F
15:30
15:30 - 16:50
Room: CR2,7F
Contributions

15:30 CARIBU Cover Foil – SRIM Studies - John Greene (Argonne National Laboratory)

15:50 Development of rotating beryllium disk stripper - Hiroo Hasebe (RIKEN)

16:10 The Stripping Foil Test Stand in the Linac4 Transfer Line - Wilhelmus Weterings (CERN)

16:30 An improvement of ACCSIM code and the stripping injection simulation - Weiping Chai (Institute of Modern Physics, Chinese Academy of Science)
Tuesday, 2 September 2014
09:00
09:00 - 09:40
Room: CR2,7F
Contributions

09:00 Production of radioisotopes for application studies at RIKEN - Hiromitsu Haba (Nishina Center for Accelerator-Based Science, RIKEN)

09:20 Present status of superheavy element production target for gas-filled recoil separators GARIS and GARIS-II - Daiya Kaji (RIKEN Nishina center)
09:40
09:40 - 10:20
Room: CR2,7F
Contributions

09:40 Target stations for S3 - Christelle Stodel (GANIL)

10:00 Liquid Li based neutron source for BNCT and science application - Hiroshi Horiike (Osaka University)
10:20 Coffee break
Coffee break
10:20 - 10:40
Room: Lobby, 7F
10:40
10:40 - 11:40
Room: CR2,7F
Contributions

10:40 Stripping of Bi and U beams in He, N2, Ar and Xe media in a modified 1.4 MeV/u gas stripper setup using a pulsed gas regime - Paul Scharrer (Helmholtz-Institut Mainz)

11:00 Development of Plasma Window at RIKEN - Hironori KUBOKI (RNC, Accelerator Group, Accelerator R&D team)

11:20 Gaseous strippers at RI beam factory; R&D and operation - Hiroshi Imao (RIKEN)
11:40
11:40 - 12:00
Room: CR2,7F
Contributions

11:40 Proton Beam-on-Liquid Lithium Stripper Film Experiment - Yoichi Momozaki (Argonne National Laboratory)
12:00

12:00 - 12:20
Room: CR2,7F

12:20 Conference photo
Conference photo
12:20 - 12:30
Room: in Miraikan

12:30 Lunch
Lunch
12:30 - 13:30

13:30 RIKEN tour
RIKEN tour
13:30 - 18:30
Wednesday, 3 September 2014
09:00
09:00 - 10:00
Room: CR2,7F
Contributions

09:00 Nanocarbon Materials: Science and Applications - Sumio Iijima (Graduate School of Science and Technology, Meijo University, National Institute of Advanced Industrial Science and Technology /Nanotube Research Center, and NEC)
10:00 Coffee break
Coffee break
10:00 - 10:20
Room: Lobby, 7F
10:20
10:20 - 12:00
Room: CR2,7F
Contributions

10:20 Measurement of continuous degradation of a stripper foil during six months operation with 300 kW beam power in the 3-GeV RCS of J-PARC - Pranab Saha (J-PARC)

10:40 Analyses and the effect of impurities contained in charge stripper foils for the 3-GeV RCS of J-PARC - Yoshio Yamazaki (J-PARC, JAEA)

11:00 Maintenance of radio-activated stripper foils in the 3GeV RCS of J-PARC - Masahiro Yoshimoto (Japan Atomic Energy Agency / J-PARC center)

11:20 Development of Carbon foil at RIKEN - Hiroo Hasebe (RIKEN)

11:40 Intense Heavy Ion Beam Induced Effects in Carbon-Based Stripper Foils - Katharina Kupka (GSI Helmholtzzentrum für Schwerionenforschung)
12:00 Lunch
Lunch
12:00 - 13:00

13:00 Excursion
Excursion
13:00 - 18:00

18:30 Banquet
Banquet
18:30 - 21:30
Thursday, 4 September 2014
09:00
09:00 - 10:20
Room: CR2,7F
Contributions

09:00 The Meson target stations and the high power spallation neutron source SINQ at PSI - Daniela Kiselev (Paul Scherrer Institut)

09:20 The graphite target for J-PARC neutrino beam-line - Takeshi Nakadaira (KEK)

09:40 A high-power Liquid-Lithium Target (LiLiT) for neutron production - Michael Paul (Hebrew University)

10:00 DEVELOPMENT OF NEUTRON GENERATING TARGET FOR COMPACT NEUTRON SOURCES USING LOW ENERGY PROTON BEAMS - Yutaka Yamagata (RIKEN)
10:20 Coffee break
Coffee break
10:20 - 10:40
Room: Lobby, 7F
10:40
10:40 - 12:00
Room: CR2,7F, Parallel session
Contributions

10:40 High power spallation target using a heavy liquid metal free surface flow - Karsten Litfin (KIT)

11:00 Indirectly Water-Cooled Production Target at J-PARC Hadron Facility - Hitoshi Takahashi (KEK)

11:20 Development of Muon Rotating Target at J-PARC/MUSE - Shunsuke Makimura (J-PARC/KEK)

11:40 Extremely efficient muon production with a novel pion capture system - Akira Sato (Osaka University)
10:40 - 12:00
Room: CR1,7F, Parallel session
Contributions

10:40 Optical property of Lithium vapor evaporated in vacuum or cover-gas area - Sachiko Yoshihashi (Osaka University)

11:00 Determination of the H content of a tristearin layer prepared by physical vapour deposition - David Vanleeuw (EC-JRC-IRMM)

11:20 In Situ Characterisation of Thin Free-Standing Targets: Alpha Particle Energy Loss Measurement & Point Confocal Microscopy - Gabriel Schaumann (Technische Universität Darmstadt)

11:40 Coating of Diamonds for Detector Application - Birgit Kindler (GSI)
12:00 Lunch
Lunch
12:00 - 13:00
13:00
13:00 - 15:00
Room: CR1,7F, Parallel session
Contributions

13:00 Development of a liquid helium-3 target system for experimental studies of antikaon-nucleon interaction at J-PARC - Masaharu Sato (RIKEN)

13:20 Pure hydrogen targets developments at CEA/IRFU - Jean marc Gheller (CEA Saclay)

13:40 High-pressure Solid Hydrogen Target for Muon Catalyzed Fusion - Teiichiro Matsuzaki (RIKEN)

14:00 Solid hydrogen target for missing mass spectroscopy in inverse kinematics - Yohei Matsuda (Konan University)

14:20 A windowless gas target for low-energy 12C (4He, 16O) gamma experiment - Improvement to reduce 16O backgrounds - - Kenshi Sagara (Department of Physics, Kyushu University)

14:40 CNS Active Target for Missing Mass Spectroscopy with Intense Beam - Shinsuke Ota (Center for Nuclear Study, University of Tokyo)
13:00 - 14:20
Room: CR2,7F, Parallel session
Contributions

13:00 Brazed Molybdenum Targets for Cyclotron Production of Technetium-99m - Stefan Zeisler (TRIUMF)

13:20 Neutron Target Research and Development for BNCT --Direct observation of proton induced blistering using light-polarization and -reflectivity changes-- - Toshikazu Kurihara (High Energy Accelerator Research Organization (KEK))

13:40 Nickel-Backed Bi Targets for the Production of 211At - John Greene (Argonne National Laboratory)

14:00 Targets of hard materials by mechanical reshaping - Anna Stolarz (Heavy Ion Laboratory, University of Warsaw, Poland)
14:20 Coffee break
Coffee break
14:20 - 14:40
Room: Lobby, 7F
14:40
14:40 - 16:00
Room: CR2,7F, Parallel session
Contributions

14:40 First developments on the CACAO laboratory - Véronique Petitbon-Thévenet (CNRS)

15:00 Improving material properties and performance of nuclear targets for transmutation-relevant experiments - Alessio Vascon (Japan Atomic Energy Agency (JAEA))

15:20 Californium Electrodepositions at Oak Ridge National Laboratory - Rose Boll (Oak Ridge National Laboratory)

15:40 High- Intensity Radioactive Targets as One of the Key Problems in Further Development of the Research Program on Synthesis of New Superheavy Elements - Sergey Dmitriev (Flerov Laboratory of Nuclear Reactions, JINR)
15:00 Coffee break
Coffee break
15:00 - 15:20
Room: Lobby, 7F
15:20
15:20 - 17:00
Room: CR1,7F, Parallel session
Contributions

15:20 Fabrication of Millimeter-sized Glass Shells for High Pressure Gas Targets - Xiaobo Qi (Research Center of Laser Fusion, China Academy of Engineering Physics)

15:40 AC–DC Electrodeposition Method for High Laser-X Ray Conversation Efficiency Material - Kai Du (Research Center of Laser Fusion, China Academy of Engineering Physics)

16:00 High Precision Assembly and Characterization System for Micro- Targets - Wenrong Wu (Research Center of Laser Fusion, CAEP)

16:20 Solid Hydrogen Film Production for Laser Target - Denis CHATAIN (CEA-France)
16:00
16:00 - 16:40
Room: CR2,7F, Parallel session
Contributions

16:00 Production of a thin diamond target by LASER for HESR at FAIR - Hannan Younis (Comsats Institute of information technology Islamabad)

16:20 50 kW Prototype of the High Power Production Target for the FRIB - Mikhail Avilov (Facility for Rare Isotope Beams Michigan State University)
Friday, 5 September 2014
09:00
09:00 - 10:40
Room: CR2,7F
Contributions

09:00 Isotopic Tungsten Targets - John Greene (Argonne National Laboratory)

09:20 Fabrication of backed 94Zr target for RDM lifetime measurement - AMAN ROHILLA (UNIVERSITY OF DELHI)

09:40 Recent target development activities at Inter-University Accelerator Centre - Abhilash S. R. (IUAC, New Delhu (India))

10:00 Improving the lifetime of carbon micro-ribbons in the RHIC CNI Polarimeter - Dannie Steski (Brookhaven National Laboratory)

10:20 Fabrication of 203,205Tl targets on carbon backing - Abhilash Sthuthikkatt Reghu (Inter-University Accelerator Centre)
10:40 Coffee break
Coffee break
10:40 - 11:00
Room: Lobby, 7F

11:00

11:00 - 13:00
Room: CR2,7F