-
17:15
ISIS Target Station Two Horn Water Pre-Moderator Failure, Investigation, and Redesign
-
Mark Telkman
(STFC)
-
17:16
Optimisation Procedures for ISIS-II Targets
-
Daniel Wells Calvo
(Technology, Science and Technology Facilities Council, UK Research and Innovation)
-
17:17
Initial Target Concepts for ISIS-II
-
Dan Wilcox
(Technology, Science and Technology Facilities Council, UK Research and Innovation)
-
17:18
Simulated and Measured Performance of ISIS TS1 Project Target
-
Dan Wilcox
(Technology, Science and Technology Facilities Council, UK Research and Innovation)
-
17:19
ISIS Target Station 2, Post Irradiation Examination of W-Ta Target no 4
-
Leslie Jones
(UKRI-STFC Rutherford Appleton Laboratory)
-
17:20
COLLIMATORS FOR THE HIGH LUMINOSITY LHC AT CERN
-
Antonio PERILLO MARCONE
(CERN)
-
17:21
OPERATIONAL EXPERIENCE OF CERN SUPER PROTON SYNCHROTRON BEAM DUMP
-
Antonio PERILLO MARCONE
(CERN)
-
17:22
Beam Intercepting Devices for the High Intensity upgrade in CERN’s SPS North Area facility
-
Rui Franqueira Ximenes
(CERN)
Marco Calviani
(CERN)
Jean-Louis Grenard
(CERN)
-
17:25
Target Systems at the Front end of the International Muon Collider
-
Marco Calviani
(CERN)
-
17:26
LINAC3 SLITS CONSOLIDATION
-
Jean-Louis Grenard
(CERN)
-
17:27
ISOLDE Beam Dumps Exchange: A challenging consolidation, from buried dumps to flexible access
-
Ana-Paula Bernardes
(CERN)
-
17:28
The Shielding Flask System at Super-FRS
-
Faraz Amjad
(GSI Helmholtz Centre for Heavy Ion Research)
-
17:29
The Muon Science Facility of MLF J-PARC
-
Naritoshi Kawamura
(J-PARC, KEK)
-
17:30
ANALYSIS OF ROTATIONAL VIBRATION OF MUON PRODUCTION TARGET AT J-PARC MLF
-
Hikaru Sunagawa
(J-PARC, KEK)
-
17:31
Development of radiation-resistant distance-sensor for rotating-disk-type target at J-PARC Hadron Experimental Facility.
-
Fumimasa MUTO
(KEK)
-
17:32
Brookhaven Linac Isotope Producer status and Pre/Post-irradiation characterization and analysis capabilities at BNL
-
Dohyun Kim
(Brookhaven National Laboratory)
-
17:33
Novel materials irradiation and pre-characterization plans for high-power targetry applications
-
Abe Burleigh
(Fermilab)
-
17:34
Testing high-DPA irradiated titanium alloys for high-cycle fatigue
-
Richard Cowan
(STFC RAL)
-
17:35
Mechanical Properties Testing, Characterization and Modeling of Proton-irradiated Ti-base Alloys and Beryllium
-
Andrew Casella
(Pacific Northwest National Laboratory)
-
17:36
Fabrication of W-1.1%TiC with helium bubbles via powder metallurgical route incorporated with helium ambient mechanical alloying
-
Tatsuaki Sakamoto
(Ehime University)
-
17:37
Recent Progress in development of Toughened, Fine Grained, Recrystallized Tungsten
-
Shunsuke Makimura
(J-PARC/KEK)
-
17:38
Development of beam window with a large diameter, a thin wall thickness and a large proof pressure for COMET exeperiment through additive manufacturing
-
Yutaka Nagasawa
(Metal Technology Co.Ltd.)
-
17:39
Life cycle of the proton beam window in J-PARC MLF
-
Motoki Ooi
(J-PARC)
-
17:40
Moderator and Reflector Fabrication Challenges at the Spallation Neutron Source
-
Doug Armitage
(Oak Ridge National Laboratory)
-
17:41
Impact and Lessons Learned from the Mercury System Filling Incident at the Spallation Neutron Source
-
Drew Winder
(Oak Ridge National Laboratory)
-
17:42
To realize accelerator driven 80kW class neutron source - defect control and thermal management.
-
Toshikazu Kurihara
(High Energy Accelerator Research Organization (KEK))
-
17:43
Experimental study of nuclide production cross sections via the $^{\rm nat}$Pb(p,X) reaction with GeV-energy proton incidence
-
Kenta SUGIHARA
(KEK)
-
17:44
Graphite enclosure power density experiment
-
Xuezhi Zhang
(Institute of Modern Physics)
-
17:45
Performance test of Granular flow target
-
Lei Yang
(Institute of Modern Physics)
-
17:46
Isotope batch production target design
-
Yaling Zhang
(Institute of Modern Physics Chinese Academy of Sciences)
-
17:47
Evaluation on the beam dump activation in the linear IFMIF prototype accelerator (LIPAc)
-
Kohki Kumagai
(National Institutes for Quantum Science and Technology)
-
17:48
High-power spallation target for Subcritical Transmutation Accelerated Reactor Technology START: challenges and perspectives
-
Massimo Barbagallo
(Transmutex)
-
17:49
Overview of High-Power Targets and Strategies for Remote Handling at TRIUMF - Canada's Particle Accelerator Center
-
Isaac Earle
(TRIUMF)